Datasheet4U Logo Datasheet4U.com

LB11690 - Pre-Driver IC for Brushless Motor Drive in Electric Bicycles

Features

  • Three-phase bipolar PWM drive (high and low side n-channel FET drive).
  • Maximum supply voltage: 45 V.
  • Gate drive voltage: about 10 V (high and low side n-channel FETs).
  • Hall sensor signal F/V conversion circuit (one-shot multivibrator output).
  • Synthesized three-phase Hall sensor signal output.
  • Built-in current limiter and undervoltage protection circuits 0.51min 0.48 1.78 (1.04) SANYO: DIP30SD (400 mil) 3235A-HSOP36 [LB11690H] 0.65 17.8.

📥 Download Datasheet

Datasheet preview – LB11690

Datasheet Details

Part number LB11690
Manufacturer Sanyo Semicon Device
File Size 237.07 KB
Description Pre-Driver IC for Brushless Motor Drive in Electric Bicycles
Datasheet download datasheet LB11690 Datasheet
Additional preview pages of the LB11690 datasheet.
Other Datasheets by Sanyo Semicon Device

Full PDF Text Transcription

Click to expand full text
Ordering number : ENN7543 www.DataSheet4U.com Monolithic digital IC LB11690, 11690H Pre-Driver IC for Brushless Motor Drive in Electric Bicycles Overview The LB11690 and LB11690H are three-phase bipolar PWM drive pre-driver ICs that allow the output circuits to be implemented using only n-channel FETs. These ICs can implement, at low cost, high-efficiency drive circuits in applications that use motors that require high drive currents. These ICs include a built-in Hall sensor signal F/V conversion circuit and can provide a voltage that is proportional to motor speed for use, for example, in speedometers for electric bicycles. These ICs also support use in applications that holds the speed controlled at a constant rate as the load varies.
Published: |